winch-ready front bumpers
WINCH-ready PRERUNNER-PLATE FRONT BUMPER
Details: Have the best of both worlds with our latest addition! We’ve combined our two most popular front bumpers, designed with STRENGTH & CLEARENCE in mind. It has great approach angle with a snug fit to the body. It has our winch-capable steel plate bumper in the center with our prerunner sides! There is a gusset design plate behind the top tubes (you will only see it, looking straight down on the bumper) that adds strength and doubles as LED pod mounts! This bumper has 5 bolts, per side. 10 bolts total to secure the bumper to your frame with added mounting brackets that bolt to your existing holes for recovery plates. The frame mounts are 3/8″ thick. There are 4, round ventilation holes on the lower half of the bumper for great air flow to your radiator and drainage. This bumper has 2 cut outs on the sides for access to your free wheel. 100% bolt-on for easy installation. There is no welding or drilling required. All new mounting hardware is included. The optional lighting is an integrated 31″ light bar. Radiator skid plate add-on available. WINCH NOT INCLUDED. Frontier & Xterra winch dimensions: 7 & 1/2″ deep, 10″ tall, 35″ wide. Tacoma winch dimensions: 7 & 1/2′ deep, 10′ tall, 35″ wide. All winches must have the standard 4.5 x 10 mounting. This bumper is already made to accommodate up to a 2″ lift.
Nissan frontier
$975
$1,075 W/ LIGHT BAR INCORPORATED
Nissan xterra
$975
$1,075 w/ light bar incorporated
Also available for
2nd gen Tacoma $1,075 or $1,175 w/ light bar incorporated
the Nissan Pathfinder (2005-2012) $975 or $1,075 w/ light bar incorporated
WINCH-ready STEEL PLAtE BUMPER
Details: This bumper is now available for the 2nd gen Nissan Frontier, Nissan Xterra, Nissan Pathfinder (2005-2008) and the Toyota Tacoma. This is the strongest front bumper we offer, designed with STRENGTH & CLEARENCE in mind! It has a great approach angle and snug fit to the body. 100% bolt-on for easy installation. There is no welding or drilling required! It’s CAD designed. This bumper is made of 100% A36, 3/16″ STEEL, mounting holes are 3/8″ thick with 5 mounting points, per side. (added mounting brackets to recovery point mounting holes) and the frame mounts are 3/8″ thick. There are 4, round ventilation holes on the lower half of the bumper for great air flow to your radiator and drainage. This bumper has 2 cut outs on the sides for access to your free wheel. This has integrated lighting (a 30″ light bar in the center, along with 2, 7″ light bars incorporated into the sides, which is a great option for those of you that want a “ready to go” lighted bumper! The lighting is North Pole cree. 30″ light bar with 2, 7″ light bars. No lighting is also an option. Comes with all new mounting hardware. Radiator skid plate add-on available. WINCH NOT INCLUDED. Frontier & Xterra winch dimensions: 7 & 1/2″ deep, 10″ tall, 35″ wide. Tacoma winch dimensions: 7 & 1/2′ deep, 10′ tall, 35″ wide. All winches must have the standard 4.5 x 10 mounting. Bare metal only (not painted). This bumper is already made to accommodate up to a 2″ body lift.
NISSAN FRONTIER
$1,175
$1,325 w/ lighting incorporated
TOYOTA TACOMA
$1,175
$1,325 w/ lighting incorporated
NISSAN XTERRA
$1,175
$1,325 w/ lighting incorporated
Also available for the 2005-2012 nissan pathfinder
WINCH-ready PRERUNNER STYLE
FRONT BUMPER
Details: This bumper is available for the 2nd gen Nissan Frontier, Xterra , Toyota Tacoma and the Nissan Pathfinder (2005-2008) Please contact me for pricing. This winch-capable front bumper is a mixture of half plate/half tubing. It’s built out of 3/16″ plate and 1 & 1 & 3/4″ with aluminum skid plate. It is plated and gusseted in all the right spots for added strength for all your winching needs! It is perfectly compatible for any 9,500-12,000 pound winch. This bumper is 100% bolt-on for easy installation! There is no welding or drilling required. WINCH NOT INCLUDED. Bare metal only (not painted)
NISSAN FRONTIER
$1,175
Also available for…
2nd gen Toyota Tacoma, Nissan Xterra and Nissan Pathfinder
WINCH-ready HYBRID
PLATE BUMPER
Details: This winch-capable front bumper is available for the 2nd gen Nissan Frontier, The Toyota Tacoma (2nd gen) and the Nissan Pathfinder (2005-2008). Please contact me for pricing. This bumper is a mixture of steel and aluminum. We made this as light, as close fitting and as high clearance as we possibly could. Only weighing in at only 88 pounds! That’s 40-50 pounds lighter than your average steel plate bumper. It mounts to stock locations and has 5 mounting points, per side. The mounting plates are 3/8″ thick. This bumper will hold any winch that will fit into the winch-compartment that is 28″width /11 & 1/4″height /7“deep. The skid plates were made bolt-on for easy access to your winch and also to save weight. So, this means when you install this bumper, you could add your winch in after your bumper is mounted. WINCH NOT INCLUDED. This bumper is 100% bolt-on for easy installation. Frontier, Xterra & Pathfinder winch dimensions: 7 & 1/2″ deep, 10″ tall, 35″ wide. Tacoma winch dimensions: 7 & 1/2′ deep, 10′ tall, 35″ wide. All winches must have the standard 4.5 x 10 mounting. Bare metal only (not painted) This bumper is already made to accommodate up to 2″ body lift.
NISSAN FRONTIER
$1,195
$1,245 w/ lighting incorporated
HYBRID PLATE front BUMPER
Details: this plate bumper is only available for the Nissan Frontier(2nd gen). This bumper is NOT WINCH-CAPABLE. If you like the looks of our original winch-capable hybrid plate bumper but, don’t plan on winching and want a nice prerunner sloped skid plate, this is the bumper for you! Again, this bumper is not winch capable. This bumper is 100% bolt on for easy installation! Bare metal only (not painted)
NISSAN FRONTIER
$1,045
$1,095 w/ lighting incorporated(2 lightbars)
bumper bundles
Details: Available for the 2nd gen Frontier, Xterra, Pathfinder (years 2005-2012) and the 2nd gen Tacoma! This bundle is available with the Deluxe (pictured) or the Tube prerunner style front bumper.
Included in bundle: Bumper of your choice, 21″ single row light bar incorporated into the center skid plate with 2, 7″ side light bars that you’ll be using in place of your stock fog lights. Also includes a Plug n’ play wiring harness for lighting. Does not include bottom prerunner style radiator style skid plate though it could be added on. With this bundle, install couldn’t be easier!
Contact me for pricing!
DELUXE PRERUNNER STYLE FRONT BUMPER
Details: This bumper is available for the 2nd gen Nissan Frontier, Nissan Xterra, Toyota Tacoma and the Nissan Pathfinder (2005-2008) This front bumper is 100% bolt-on for easy installation. There is no welding or drilling required! Made of 1 & 3/4″ .120 wall tubing with 3/16″ skid plate. HREW standard with DOM upgrade also available. Made standard height. If you have body lift ( up to 2″) it must be made custom to accommodate. Bare metal only (not painted)
NISSAN FRONTIER
$645
Nissan Xterra
$695
NISSAN PATHFINDER (2005-2012)
$645
Toyota Tacoma
$645
TUBE PRERUNNER STYLE FRONT BUMPER
Details: This bumper is available for the Nissan Frontier (2nd gen) The Nissan Xterra (2nd Gen) The Toyota Tacoma (2nd gen) and the Nissan Pathfinder (2005-2008). This bumper is basically the same as our original Deluxe prerunner style front bumper. So, you could get the same look & quality for less! The only difference being, tubing is used for the uprights instead of the boxed uprights and there is a slight bend on the side tubes to clear the mounting bolts. Made of 1 & 3/4″ .120 wall tubing with 3/16″ skid plate. HREW standard with DOM upgrade available. It’s 100% bolt-on and there is no welding or drilling required! Made standard height. If you have body lift ( up to 2″) it must be made custom to accommodate. Bare metal only ( not painted)
NISSAN FRONTIER
$595
NISSAN XTERRA
$645
Toyota Tacoma
$595
PRERUNNER STYLE PUSH BAR
Details: This prerunner style push bar is available for the Nissan Frontier (2nd Gen) The Nissan Xterra (2nd Gen) The Toyota Tacoma (2nd gen) and the Nissan Pathfinder (2005-2008) This is our LOWEST priced bumper! Made of 1 & 3/4″ .120 wall tubing with 3/16″ skid plate. HREW standard with DOM upgrade available. It is 100% bolt-on for easy installation. There is no welding or drilling required! Made standard height. If you have body lift ( up to 2″) it must be made custom to accommodate. Bare metal only (not painted)
NISSAN FRONTIER
$475
This bumper is also available for…
the 2nd gen Nissan Xterra, Nissan Pathfinder(2005-2012) and the Toyota Tacoma
ADD-ON OPTIONS
SINGLE large HOOP: $75
Details: This hoop could be added to any of our front bumpers.
TRIPLE HOOPS $150
local pick-up only. Cannot be shipped.
prerunner hoop $125
YOUR LIGHT BAR INCORPORATED INTO THE SKID PLATE: $75
Details: This is a great option if you would like your light bar added with added protection. We incorporate your light bar inside the skid plate so, it’s bolted in place and can’t be stolen or as easily damaged. You would need to ship us your light bar to insure perfect fitment. Max size 20″ single row. We also offer a new bumper bundle that includes light bar incorporated, along with side lighting. Please scroll up to our bumper bundle for full info.
Universal radiator skid plate: $250
Details: This universal radiator skid plate will go perfectly with ANY ONE OF OUR FRONT BUMPERS! This means, if you already have one of our bumpers, you could add this on now! It’s 100% bolt-on for easy installation. This skid plate works with OUR BUMPERS ONLY. It does not work with stock bumpers. The access hole to your oil filter, conveniently unbolts so, you could reach right in when needed. It bolts up in 6 spots. Each side attaches to your recovery point location. 2 bolts also run across your crossmember. Made of A36, 3/16″ steel. ALL HARDWARE INCLUDED! Bare metal only (not painted)
Prerunner RADIATOR SKID-PLATE: $150
Details: This is currently only available for the Nissan Frontier (2nd gen) prerunner bumpers. It’s a great addition to add protection for your radiator and bottom of your engine. It’s made of 1 & 3/4″ tubing with a detachable 3/16″ aluminum skid plate. To access oil filter, you will need to unbolt 4 bolts to remove skid plate. This will bolt in place of your sway bar. Your sway bar will need to be removed. This skid plate must be ordered at the time your bumper order is placed, It could not be ordered alone or at a later date.
TABS TO ACCOMEDATE YOUR LIGHTBAR on top: $50
Details: Tabs are added to the top of the bumper to accommodate your light bar. You would need to ship us your light bar to insure perfect fitment. Max size 32″.
TABS TO ACCOMEDATE YOUR ROUND LIGHTS on top: $50
Details: In order to add your round lighting on top, we now have to add spacer mounts to the bumper as well as provide you with new longer bolts.
SET OF TABS TO ACCOMEDATE your LED PODS: $10
SET OF RECOVERY POINTS welded TO BUMPER: $75
Details: Add some BEEFY recovery points to your bumper to handle your recovery needs. These are made of 1/2″ A36 plate. A set of recovery points are welded to your front bumper as a place to add D-ring shackles or attach a hook from a winch to help you with recovery. You will need 3/4″ shackles. Bare metal only (not painted)
INSTALL INSTRUCTIONS
NISSAN FRONTIER/NISSAN PATHFINDER: For stock chrome bumpers; install consists of simply unbolting your stock bumper and bumper brace. Our bumper will then bolt up in place, using your stock hardware or the hardware we provide for the plate bumpers.
For plastic 1 piece bumpers; install consists of cutting your stock bumper 1 inch above the false seam. You will then remove your bumper brace. The cut is easily done using a razor blade or a small body saw. Once removed, our bumper bolts up in place using your stock hardware or hardware that we provide for plate bumpers.
NISSAN XTERRA: Your stock bumper will need to be unbolted and your bumper brace removed. There is no cutting involved! Our bumper then bolts up in place of your bumper brace using your stock hardware or the hardware we provide for plate bumpers.
TOYOTA TACOMA: Your stock bumper will need to be unbolted and your bumper brace removed. There is no cutting involved! Our bumper then bolts up in place of your bumper brace using your stock hardware or the hardware we provide for plate bumpers.